Next:
The Scan Process in
Up:
The STXM V User's Manual
Previous:
After a crash
Contents
Advanced information
Subsections
The Scan Process in more Detail
Scan Types in the Scan Menu
The Scan Setup Window
Detector channels to record
The Scan Process
Scanning the Monochromator (EV)
Scan Direction
Linearity in Monochromator Scans
Scan Directions and the Orientation of the Image
Obtaining Data Files for later Analysis
File Naming Conventions
Downloading Data Files from the Web
Burning Data Files to CD / DVD
Accessing Recent Data Files
Directly in the microscope control program
From the thumbnail website
From the file system in the
X1A
network
Which Data STXM 5 Records -- STXM 5 Display Concept
The 3-dimensional Dataset
Which Signals are read by Default
Signal Types ("Flavors")
Raw Integers (
image_data_intraw
)
Raw Counts / mVolts (
image_data_raw
)
Calibrated kHz (
image_data_khz
)
Predefined Combinations
Custom (User-defined) Display Combinations in
SM_GUI
Invalid custom display definitions
Choosing Different Signals in
SM_GUI
and
read_stxm5.pro
Choosing the Display in
SM_GUI
Choosing the Display in
read_stxm5.pro
Predefined Combinations
Reading and Understanding STXM 5 Data Files
The Contents of STXM 5 Data Files
Viewing Data Files in
SM_GUI
Reading Data Files on the IDL Command Line
Reading Point Spectra
The
sm_par
Structure
Writing STXM 5 Data files with
write_stxm5.pro
Changing / Overwriting Data Files
Silicon Detector Calibration
Calibration Model
Crosstalk correction
Dark signal subtraction and conversion to photon count rate
Chip Quantum Efficiency
Calibrating the Detector
The Structure of the netCDF File
Data File Format Changelog
Client-Server Concept and Networking How-To
Client-Server Concept
X1A and NSLS/BNL Network Structure
Microscope Remote Control
x1a
subnet
BNL intranet
Outside world
Tunnelling the VLM
Access to Data Files "Locally" and "On the Server"
Alignment of STXM V
Homing of stepping motor stages
Initial alignment
Visible light microscope (VLM) setup
Detector prealignment
Beam into the chamber
Aligning microscope components
Correcting the tilt of the ZSTG axis with respect to the beam axis
Determining the drift parameters
Software correction
Hardware correction
Aligning the laser interferometer
Aligning the mirrors
Initial alignment
Adjusting the receiver gain
Aligning inboard STXM to the Nitrogen edge
Mounting of ZP and/or OSA on glass cones
Configuration and alignment files
The alignment file
The configuration file
The silicon detector calibration file
The beamline slitsettings file
The NSLS ring parameters file
Moving Motors with the XPS Controller
Web Interface
Remote Control
Holger Fleckenstein 2008-07-08
