Next:
Contents
Contents
The Charge Integrating Silicon Detector with Segmentation
B. Hornberger, M. Feser, G. DeGeronimo, P. Rehak, C. Jacobsen
Contents
Detector To-Do List
Detector Segments
Detector Installation
Components
Kenwood Power Supply
Power filter box
Timing Module
Setup for integrating mode
Setup for quasi-current mode
Preparation Of The Detector Electronics And Chips For Use
Adjustments On The Potentiometers Of The Large PC-board
Front PC-Board Adjustments
Bench Measurement Of Detector Leakage Currents
Measurement Setup
Measuring Procedure
Checking Of Preamplifier and Sample and Hold outputs
Bonding Assignment
Detector Calibration
Quick Summary
Background
Taking the Scans necessary for the Calibration
The Program
detcal_gui
Doing the Crosstalk Correction
Entering eV per fC and the dead time
Dark Current Correction
Dark Current Histogram and Noise Analysis
C Tuning
Finishing up
Old Notes about STXM 4 Detector Calibration
Crosstalk Correction
Correction For Detector Dark Currents
Detector Calibration Within The GUI
Detector Alignment
X and Y Alignment
Z Alignment
Interfacing Of The Detector With A Data Acquisition System
Voltage Output
Triggering
Proposed Implementation For APS Step Scans
Proposed Implementation For APS
Fly
-scans
Bibliography
About this document ...
Microscope User 2007-02-02
