Next: Inputs/Outputs with the X1 Up: Beamline interlock: further details Previous: Rung 67: End of Contents
As noted before, the input/output channels of the programmable logic controller can be
found
here.
The wiring of the beamline interlock back panel is as follows:
| Connector 1 | Pin 1 | Black | V1 coil power | 110 V AC | ||
| Pin 2 | Brown | V1 coil power | ||||
| Pin 3 | Red | V1 open microswitch | (N.O.) | closed when V1 open | ||
| Pin 4 | Orang | V1 open microswitch | (Common) | |||
| Pin 5 | Yellow | V1 closed microswitch | (N.O.) | closed when V1 closed | ||
| Pin 6 | Green | V1 closed microswitch | (common) | |||
| Pin 7 | Shield | V1 cable shield (tied to AC ground) |
| Connector 2 | Pin 1 | Black | V3 coil power | 110 V AC | ||
| Pin 2 | Brown | V3 coil power | ||||
| Pin 3 | Red | V3 open microswitch | (N.O.) | |||
| Pin 4 | Orange | V3 open microswitch | (common) | |||
| Pin 5 | Yellow | V3 closed microswitch | (N.O.) | |||
| Pin 6 | Green | V3 closed microswitch | (common) | |||
| Pin 7 | Shield | V3 cable shield (tied to AC ground) |
| Connector 3 | Pin 1 | Black | V4i coil power | 110 V AC | ||
| Pin 2 | Brown | V4i coil power | ||||
| Pin 3 | Red | V4i open microswitch | (N.O.) | |||
| Pin 4 | Orange | V4i open microswitch | (common) | |||
| Pin 5 | Yellow | V4i closed microswitch | (N.O.) | |||
| Pin 6 | Green | V4i closed microswitch | (common) | |||
| Pin 7 | Shield | V4i cable shield (tied to AC ground) |
| Connector 4 | Pin 1 | Black | V5i coil power | 110 V AC | ||
| Pin 2 | Brown | V5i coil power | ||||
| Pin 3 | Red | V5i open microswitch | (N.O.) | |||
| Pin 4 | Orange | V5i open microswitch | (common) | |||
| Pin 5 | Yellow | V5i closed microswitch | (N.O.) | |||
| Pin 6 | Green | V5i closed microswitch | (common) | |||
| Pin 7 | Shield | V5i cable shield (tied to AC ground) |
| Connector 5 | Pin 1 | Black | V7i coil power | 110 V AC | ||
| Pin 2 | Brown | V7i coil power | ||||
| Pin 3 | Red | V7i open microswitch | (N.O.) | |||
| Pin 4 | Orange | V7i open microswitch | (common) | |||
| Pin 5 | Yellow | V7i closed microswitch | (N.O.) | |||
| Pin 6 | Green | V7i closed microswitch | (common) | |||
| Pin 7 | Shield | V7i cable shield (tied to AC ground) |
| Connector 6 | Pin 1 | Black | V9i coil power | 110 V AC | ||
| Pin 2 | Brown | V9i coil power | ||||
| Pin 3 | Red | V9i open microswitch | (N.O.) | |||
| Pin 4 | Orange | V9i open microswitch | (common) | |||
| Pin 5 | Yellow | V9i closed microswitch | (N.O.) | |||
| Pin 6 | Green | V9i closed microswitch | (common) | |||
| Pin 7 | Shield | V9i cable shield (tied to AC ground) |
| Connector 7 | Pin 1 | Black | V10i coil power | 110 V AC | ||
| Pin 2 | Brown | V10i coil power | ||||
| Pin 3 | Red | V10i open microswitch | (N.O.) | |||
| Pin 4 | Orange | V10i open microswitch | (common) | |||
| Pin 5 | Yellow | V10i closed microswitch | (N.O.) | |||
| Pin 6 | Green | V10i closed microswitch | (common) | |||
| Pin 7 | Shield | V10i cable shield (tied to AC ground) |
| Connector 8 | Pin 1 | Black | V11i coil power | 110 V AC | ||
| Pin 2 | Brown | V11i coil power | ||||
| Pin 3 | Red | V11i open microswitch | (N.O.) | |||
| Pin 4 | Orange | V11i open microswitch | (common) | |||
| Pin 5 | Yellow | V11i closed microswitch | (N.O.) | |||
| Pin 6 | Green | V11i closed microswitch | (common) | |||
| Pin 7 | Shield | V11i cable shield (tied to AC ground) |
| Connector 9 | Pin 1 | Black | V4o coil power | 110 V AC | ||
| Pin 2 | Brown | V4o coil power | ||||
| Pin 3 | Red | V4o open microswitch | (N.O.) | |||
| Pin 4 | Orange | V4o open microswitch | (common) | |||
| Pin 5 | Yellow | V4o closed microswitch | (N.O.) | |||
| Pin 6 | Green | V4o closed microswitch | (common) | |||
| Pin 7 | Shield | V4o cable shield (tied to AC ground) |
| Connector 10 | Pin 1 | Black | V5o coil power | 110 V AC | ||
| Pin 2 | Brown | V5o coil power | ||||
| Pin 3 | Red | V5o open microswitch | (N.O.) | |||
| Pin 4 | Orange | V5o open microswitch | (common) | |||
| Pin 5 | Yellow | V5o closed microswitch | (N.O.) | |||
| Pin 6 | Green | V5o closed microswitch | (common) | |||
| Pin 7 | Shield | V5o cable shield (tied to AC ground) |
| Connector 11 | Pin 1 | Black | V7o coil power | 110 V AC | ||
| Pin 2 | Brown | V7o coil power | ||||
| Pin 3 | Red | V7o open microswitch | (N.O.) | |||
| Pin 4 | Orange | V7o open microswitch | (common) | |||
| Pin 5 | Yellow | V7o closed microswitch | (N.O.) | |||
| Pin 6 | Green | V7o closed microswitch | (common) | |||
| Pin 7 | Shield | V7o cable shield (tied to AC ground ) |
| Connector 12 | Pin 1 | Black | V9o coil power | 110 V AC | ||
| Pin 2 | Brown | V9o coil power | ||||
| Pin 3 | Red | V9o open microswitch | (N.O.) | |||
| Pin 4 | Orange | V9o open microswitch | (common) | |||
| Pin 5 | Yellow | V9o closed microswitch | (N.O.) | |||
| Pin 6 | Green | V9o closed microswitch | (common) | |||
| Pin 7 | Shiel | V9o cable shield (tied to AC ground) |
| Connector 13 | Pin 1 | Black | V10o coil power | 110 V AC | ||
| Pin 2 | Brown | V10o coil power | ||||
| Pin 3 | Red | V10o open microswitch | (N.O.) | |||
| Pin 4 | Orange | V10o open microswitch | (common) | |||
| Pin 5 | Yellow | V10o closed microswitch | (N.O.) | |||
| Pin 6 | Green | V10o closed microswitch | (common) | |||
| Pin 7 | Shield | V10o cable shield (tied to AC ground) |
| Connector 14 | Pin 1 | Black | M0 retracted (common) | (from microswitch) | ||
| Pin 2 | Brown | M0 retracted (N.O.) | (from microswitch) | closed when M0 fully retracted | ||
| Pin 3 | Red | M0 retracted (common) | (to E500) | not used | ||
| Pin 4 | Orange | M0 retracted (N.C.) | (to E500) | not used | (open when M0 fully retracted) | |
| Pin 5 | Yellow | M0 retracted (N.C.) | (from microswitch) | not used | (open when M0 fully retracted) | |
| Pin 6 | Shield | Cable shield (tied to AC ground) |
| Connector 15 | Pin 1 | Black | FEVNO (front end vacuum) | (N.O.) | NSLS | closed when pressure below setpoint |
| Pin 2 | Brown | FEVC | (common) | NSLS | ||
| Pin 3 | Red | MONO (mask open) | (N.O.) | NSLS | closed when mask/shutter open | |
| Pin 4 | Orange | MOC | (common) | NSLS | ||
| Pin 5 | Yellow | ASNO (automatic shutter) | (N.O.) | NSLS | closed when in auto mode | |
| Pin 6 | Green | ASC | (common) | NSLS | ||
| Pin 7 | Shield | Cable shield (tied to AC ground) |
| Connector 16 | Pin 1 | Black | EMNO (enable mask) | (N.O.) | X1A | closed when ok for mask to open |
| Pin 2 | Brown | EMC | (common) | X1A | ||
| Pin 3 | Red | EMNC | (N.C.) | X1A | open when ok for mask open | |
| Pin 4 | Orange | AACNO (X1A active) | (N.O.) | X1A | closed when X1A active | |
| Pin 5 | Yellow | AACC | (common) | X1A | ||
| Pin 6 | Green | BACNO (X1B active) | (N.O.) | X1A | closed when X1B active | |
| Pin 7 | Blue | BACC | (common) | X1A | ||
| Pin 8 | Shield | Cable shield (tied to AC ground) |
NOTE: See section ``Front End Harness'' below for wiring from Connectors 15 and 16 to the front end interlock.
| Connector 17 | Pin 1 | Black | BENNO (X1B mask enabled) | (N.O.) | from X1B | closed when X1B ok for beam |
| Pin 2 | Brown | BENC | (common) | from X1B | ||
| Pin 3 | Red | BACNO (X1B active) | (N.O.) | from X1B | closed when X1B taking beam | |
| Pin 4 | Orange | BACC | (common) | from X1B | ||
| Pin 5 | Yellow | G2NO (G2 status) | to X1B | closed when G2 pressure below setpoint | ||
| Pin 6 | Green | G2C | to X1B | setpoint | ||
| Pin 7 | Violet | Cable shield (tied to AC ground) | ||||
| Pin 8 | Blue | to X1B | connected to relay 13 so | |||
| Pin 9 | Shield | to X1B | pin 8 + 9 connect when m |
| Connector 18 | Pin 1 | Black | V9i EP open 1 | exp. panel | ||
| Pin 2 | Brown | V9i EP open 2 | ||||
| Pin 3 | Red | V9i EP close 1 | ||||
| Pin 4 | Orange | V9i EP close 2 | ||||
| Pin 5 | Yellow | V9i EP openlight | (N.O.) | |||
| Pin 6 | Green | V9i EP closedlight | (N.O.) | |||
| Pin 7 | Blue | V9i EP lightcommon | (common) | |||
| Pin 8 | Shield | Cable shield (tied to AC ground) |
| Connector 19 | Pin 1 | Black | V10i EP open 1 | exp. panel | ||
| Pin 2 | Brown | V10i EP open 2 | ||||
| Pin 3 | Red | V10i EP close 1 | ||||
| Pin 4 | Orange | V10i EP close 2 | ||||
| Pin 5 | Yellow | V10i EP openlight | (N.O.) | |||
| Pin 6 | Green | V10i EP closedlight | (N.O.) | |||
| Pin 7 | Blue | V10i EP lightcommon | (common) | |||
| Pin 8 | Shield | Cable shield (tied to AC ground) |
| Connector 20 | Pin 1 | Black | V11i EP open 1 | exp. panel | ||
| Pin 2 | Brown | V11i EP open 2 | ||||
| Pin 3 | Red | V11i EP close 1 | ||||
| Pin 4 | Orange | V11i EP close 2 | ||||
| Pin 5 | Yellow | V11i EP openlight | (N.O.) | |||
| Pin 6 | Green | V11i EP closedlight | (N.O.) | |||
| Pin 7 | Blue | V11i EP lightcommon | (common) | |||
| Pin 8 | Shield | Cable shield (tied to AC ground) |
| Connector 21 | Pin 1 | Black | V9o EP open 1 | exp. panel | ||
| Pin 2 | Brown | V9o EP open 2 | ||||
| Pin 3 | Red | V9o EP close 1 | ||||
| Pin 4 | Orange | V9o EP close 2 | ||||
| Pin 5 | Yellow | V9o EP openlight | (N.O.) | |||
| Pin 6 | Green | V9o EP closedlight | (N.O.) | |||
| Pin 7 | Blue | V9o EP lightcommon | (common) | |||
| Pin 8 | Shield | Cable shield (tied to AC ground) |
| Connector 22 | Pin 1 | Black | V10o EP open 1 | exp. panel | ||
| Pin 2 | Brown | V10o EP open 2 | ||||
| Pin 3 | Red | V10o EP close 1 | ||||
| Pin 4 | Orange | V10o EP close 2 | ||||
| Pin 5 | Yellow | V10o EP openlight | (N.O.) | |||
| Pin 6 | Green | V10o EP closedlight | (N.O.) | |||
| Pin 7 | Blue | V10o EP lightcommon | (common) | |||
| Pin 8 | Shield | Cable shield (tied to AC ground) |
| Connector 23 | Pin 1 | Black | EP1 mask/shutter openlight | (N.O.) | outboard | |
| Pin 2 | White | EP1 mask.shutter closedlight | (N.O.) | outboard | ||
| Pin 3 | Green | EP1 mask/shutter lightcommon | (common) | outboard | ||
| Pin 4 | Black | EP2 mask/shutter openlight | (N.O.) | inboard | ||
| Pin 5 | White | EP2 mask.shutter closedlight | (N.O.) | inboard | ||
| Pin 6 | Green | EP2 mask/shutter lightcommon | (common) | inboard | ||
| Pin 7 | Shield | Cable shield (tied to AC ground) |
| Connector 24 | not connected |
| Connector 25 | Pin 1 | Black | House air pressure sensor | (N.O.) | closed when ok | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 26 | Pin 1 | Black | Water flow 1 sensor | (N.O.) | closed when ok | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 27 | Pin 1 | Black | Water flow 2 sensor | (N.O.) | closed when ok | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 28 | Pin 1 | Black | Water flow inboard grating sensor | (N.O.) | closed when ok | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 29 | Pin 1 | Black | Water flow outboard grating sensor | (N.O.) | closed when ok | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 30 | Pin 1 | Black | G1 status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 31 | Pin 1 | Black | G2 status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 32 | Pin 1 | Black | G3 status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 33 | Pin 1 | Black | G4 status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 34 | Pin 1 | Black | G5i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 35 | Pin 1 | Black | G5o status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 36 | Pin 1 | Black | G6i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 37 | Pin 1 | Black | G6o status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 38 | Pin 1 | Black | G8i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 39 | Pin 1 | Black | G8o status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 40 | Pin 1 | Black | G9i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 41 | Pin 1 | Black | G9o status | (N.O.) | closed when pressure below setpoint | |
| Pin | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 42 | Pin 1 | Black | G10i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 43 | Pin 1 | Black | G12i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 44 | Pin 1 | Black | G11i status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 45 | Pin 1 | Black | G11o status | (N.O.) | closed when pressure below setpoint | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 46 | Pin 1 | Black | V2 open microswitch | (N.O.) | closed when V2 is fully open | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |
| Connector 47 | Pin 1 | Black | He box closed microswitch | (N.O.) | closed when He box in place | |
| Pin 2 | White | (common) | ||||
| Pin 3 | Shield | Cable shield (tied to AC ground) |